Multi Stream Transport (MST) Hubs

UltraAV® DisplayPort 1.2 to 3 DisplayPort Multi-Display MST Hub

 

Product Code:

  • K088B-002B

Main features of the UltraAV® DisplayPort 1.2 to 3 DisplayPort Multi-Display MST Hub:

  • Works on DisplayPort (or Mini DisplayPort) enabled Windows

  • Utilises new Multi-Stream Transport (MST) protocols

  • Supports up to 3 displays independently at 2048x1536 @ 60Hz each with DP 1.2

  • Connect 2 Multi-Display Hubs for 6 Displays

  • Supports per lane data rates of 5.4 Gbps (HBR2), 2.7 Gbps (HBR) and 1.62 Gbps (RBR)

  • Supports resolutions up to 2048X1536 @ 60Hz each monitor in DP1.2 MST mode

  • Supports resolutions up to 2560x1600 @ 60Hz (mirror mode) in DP1.1 (or 1.2) in SST mode.

  • Standards compliance: DisplayPort v1.2/1.1a,VESA DDM ,HDCP V2.0 and EDID V1.4

  • Features 3 DP++ output ports, adapt to any combination of 3 ports or 2 dual-link DVI ports

  • Input pixel data depth 6/8/10/12 bits and supports output pixel format RGB444

The maximum number of displays that can be enabled at the same time is limited by the number of display pipes.

UltraAV® Mini DisplayPort 1.2 to 3 DisplayPort Multi-Display MST Hub

 

Product Code:

  • K088B-003B

Main features of the UltraAV® Mini DisplayPort 1.2 to 3 DisplayPort Multi-Display MST Hub:

  • View a Single Image Across Three Displays

  • Works on DisplayPort (or Mini DisplayPort) enabled Windows

  • Utilises new Multi-Stream Transport (MST) protocols

  • Supports up to 3 displays independently at 2048x1536 @ 60Hz each with DP 1.2

  • Connect 2 Multi-Display Hubs for 6 Displays

  • ​Supports per lane data rates of 5.4 Gbps (HBR2), 2.7 Gbps (HBR) and 1.62 Gbps (RBR)

  • Supports resolutions up to 2048x1536 @ 60Hz each monitor in DP1.2 MST mode

  • Supports resolutions up to 2560x1600 @ 60Hz (clone mode) in DP1.1 (or 1.2) in SST mode

  • Standards compliance: DisplayPort v1.2/1.1a,VESA DDM ,HDCP V2.0 and EDID V1.4

  • Features 3 DP++ output ports, adapt to any combination of 3 ports or 2 dual-link DVI ports

  • Input pixel data depth 6/8/10/12 bits and supports output pixel format RGB444

The maximum number of displays that can be enabled at the same time is limited by the number of display pipes.

UltraAV® DisplayPort 1.2 to 2 DisplayPort Multi-Display MST Hub

 

Product Code:

  • K088B-004B

Main features of the UltraAV® Mini DisplayPort 1.2 to 3 DisplayPort Multi-Display MST Hub:

  • Provides full display performance with virtually zero latency and no display application limitations.

  • No additional software to install, just Plug-and-Play.

  • Works with a desktop or notebook computer that has a DisplayPort output.

  • Designed to work with monitors that have a DisplayPort input.

  • Works on a DisplayPort enabled Windows PC.

  • Utilises new Multi-Transport (MST) protocols

  • Scan button refreshes all connections made to the hub.

The maximum number of displays that can be enabled at the same time is limited by the number of display pipes.

UltraAV® Mini DisplayPort 1.2 to 2 DisplayPort Multi-Display MST Hub

 

Product Code:

  • K088B-005B

Main features of the UltraAV® Mini DisplayPort 1.2 to 2 DisplayPort Multi-Display MST Hub:

  • Provides full display performance with virtually zero latency and no display application limitations.

  • No additional software to install, just Plug-and-Play.

  • Works with a desktop or notebook computer that has a Mini DisplayPort output.

  • Works on a DisplayPort enabled Windows PC.

  • Utilises new Multi-Transport (MST) protocols

  • Scan button refreshes all connections made to the hub.

The maximum number of displays that can be enabled at the same time is limited by the number of display pipes.

UltraAV® Mini DisplayPort 1.2 to 4 DisplayPort Multi-Display MST Hub

 

Product Code:

  • K088B-007B

Main features of the UltraAV® Mini DisplayPort 1.2 to 4 DisplayPort Multi-Display MST Hub:

  • Supports per lane data rates of 5.4Gbps (HBR2), 2.7Gbps (HBR) and 1.62Gbps (RBR).

  • Supports resolutions up to 1920x1080 @ 60Hz, 24bpp each monitor independently in DP1.2 MST mode. Higher monitor resolutions supported when using fewer monitors.

  • Standards compliance: DisplayPort v1.2/1.1a, VESA DDM, HDCP V2.0 and EDID V1.4.

  • Features 4 DP++ output ports, adapt to any combination of the 4 ports. See notes below.

  • Input pixel data depth 6/8/10/12 bits and supports output pixel format RGB444.

  • System Requirements:

  • Graphic Output: Mini DisplayPort v.1.1 or v.1.2

  • Works on Windows PC

​The maximum number of displays that can be enabled at the same time is limited by the number of display pipes.

UltraAV® DisplayPort 1.2 to 3 HDMI Multi-Display MST Hub

 

Product Code:

  • K088B-008B

Main features of the UltraAV® DisplayPort 1.2 to 3 HDMI Multi-Display MST Hub:

  • Utilises new Multi-Stream Transport (MST) protocol (DP 1.2 required)

  • Supports DisplayPort per lane data rates up to 5.4 Gbps (HBR2)

  • Compatible with DVI displays using optional adapters

  • Compatible to HDMI 1.4a specification up to 10.2Gbps per port

  • Supports 3D video formats

  • Standards compliance: DisplayPort v1.2/1.1a, VESA DDM, HDCP V1.3 and EDID V1.4

  • Supports input pixel data depth 6/8/10/12 bits

  • Supports output pixel format RGB444

  • Maximum Supported Resolutions:

  • Using 3 displays: 2 displays at 1920x1080 @ 60Hz and 1 display at 2560x1600 @ 60Hz

  • Using 2 displays: 1 display at 2560x1600 @ 60Hz and 1 display at 1920x1200 @ 60Hz

  • Using 1 display: Supports 4Kx2K @ 30Hz video formats

​The maximum number of displays that can be enabled at the same time is limited by the number of display pipes.

UltraAV® Mini DisplayPort 1.2 to 3 HDMI Multi-Display MST Hub

 

Product Code:

  • K088B-009B

Main features of the UltraAV® Mini DisplayPort 1.2 to 3 HDMI Multi-Display MST Hub:

  • Utilises new Multi-Stream Transport (MST) protocol (DP 1.2 required)

  • Supports DisplayPort per lane data rates up to 5.4 Gbps (HBR2)

  • Compatible with DVI displays using optional adapters

  • Compatible to HDMI 1.4a specification up to 10.2Gbps per port

  • Supports 3D video formats

  • Standards compliance: DisplayPort v1.2/1.1a, VESA DDM, HDCP V1.3 and EDID V1.4

  • Supports input pixel data depth 6/8/10/12 bits

  • Supports output pixel format RGB444

  • Maximum Supported Resolutions:

  • Using 3 displays: 2 displays at 1920x1080 @ 60Hz and 1 display at 2560x1600 @ 60Hz

  • Using 2 displays: 1 display at 2560x1600 @ 60Hz and 1 display at 1920x1200 @ 60Hz

  • Using 1 display: Supports 4Kx2K @ 30Hz video formats

​The maximum number of displays that can be enabled at the same time is limited by the number of display pipes.

USB-C Mini Dock - HDMI 2.0, USB-A 2.0, and USB-C Charging Port

 

Product Code:
  • U206B-001B

Add a HDMI 2.0 Output, a USB-A 2.0 Port, and a USB-C Charging Port
This Accell USB-C Mini Dock converts your device’s USB-C port into 1 HDMI 2.0 port (4K@60Hz), 1 USB-A 2.0 port, and 1 USB-C charging port. The compact multi-port solution features a foldable, flat cable that safely stores the USB-C connector for durability and portability -- the perfect design for business and travel. The mini dock is plug-and-play ready, requiring no additional software or driver.

Get Connected while Powering Your Device from the Same USB-C Port
The mini dock provides a 4K UHD video output and USB-A port from a single USB-C port, and also includes a charging port to conserve a full-function USB-C port (with data and video capabilities) from charging duty. The mini dock’s USB-C charging port enables the source device’s charging adapter to supply power through the mini dock to the source device.

Main features of the USB-C Mini Dock - HDMI 2.0, USB-A 2.0, and USB-C Charging Port:

  • HDMI 2.0 video output supports resolutions up to 4K UHD @60Hz

  • Foldable, flat cable protects the USB-C connector during storage/travel for longevity

  • USB-A port to connect a mouse, keyboard, or any USB-A accessory

  • Plug-and-play ready; no additional software or driver required

  • Self-powered, no external power required

    

Specifications:

  • HDMI 2.0 compliant: Up to 18Gbps of bandwidth for resolutions up to 4096x2160@60Hz

  • USB 2.0 compliant port enables data transfer speeds up to 480Mbps

  • USB-A 2.0 port provides up to 0.5A of charging output from the source device

  • USB-C charging port provides up to 20V@3A of charging input to the source device

    

System Requirements:

  • USB-C Port with DisplayPort ALT mode

  • Windows XP and above, Mac OS and above, or Chrome OS

USB-C to 3 DisplayPort Multiple Display (MST) Hub

 

Product Code:
  • U226B-001B

Minimum System Requirements

  • Windows operating system

  • Graphics card that supports DisplayPort Alt Mode over USB-C. Check with the manufacturer of the graphics card if not sure.

  • Tested compatible devices: Dell XPS 12, Dell XPS 13, HP Elitebook x360 G2, HP ZBook, Surface Book 2

  • Direct connection to a computer. Use of a docking station between the computer and MST hub is not recommended.

 

Vivid Visuals with 4K Resolution
The USB-C multi-monitor hub can simultaneously display up to 4Kx2K resolution on up to 2 monitors. The bandwidth can accommodate an additional monitor up to 1080p.

Please note:

  • If the displays do not automatically configure to the maximum supported resolution and refresh rate, please adjust in Display settings

  • If a monitor does not display

 

  1. You may want to disable the laptop's built-in screen

  2. Try setting the refresh rate to one Hz lower such as 59Hz, 29Hz

 

One Port Does All
The USB Type C input delivers power and data through one cord, eliminating the need for an additional power adapter. The compact design allows you to easily pack the hub for your travels.

 

Mirror or Extend Your Desktop Over 3 Displays
Accell’s USB-C to 3 DisplayPort Multi-Display Hub connects up to 3 monitors from a single USB-C output. The multi-monitor splitter supports 3 independent displays.


You can view a single image across three displays for gaming, graphic design, or spreadsheet analysis. You can also dedicate each display to a separate application for efficient and productive multitasking. Use 2 MST Hubs with a graphics card with multiple video outputs to connect up to 6 external displays -- ideal for digital signage applications such as video wall configurations.

Please note:

  1. 2-hub configurations require a video card with 2 USB-C outputs

  2. The maximum number of displays is limited by the number of Display Pipes. See Video Card manufacturer for details.

Main features of the USB-C to 3 DisplayPort Multiple Display (MST) Hub:

  • Compatible with Thunderbolt 3

  • Data bandwidth up to 5.4 Gbps per lane, 21.6 Gbps total

  • Can simultaneously display 2 Ultra HD resolution

  • Compliant to DisplayPort versions 1.2 and 1.1a, VESA DDM, HDCP 1.3

  • Advanced WideEye™SerDes Technology capable of receiving data over a long range

 

Frequently Asked Questions
Q: Using the Accell MST hub, how can I get my monitors in extended mode? Right now they are mirroring each other.

A: Go to display settings and configure each monitor to Extend mode. If the monitors are not recognized as independent displays, it is likely that the system does not support the MST technology.

 

Q: Using the Accell MST hub, how can I get all of my monitors to display? Only some are displaying.

A: Go to display settings and configure each monitor's resolution and refresh rate. You may want to set the refresh rate to one Hz lower such as 59Hz or 29Hz. Each graphics card can support a maximum number of displays at once, even when using the MST hub. This includes a laptop's built-in screen. You may want to disable the laptop's built-in screen if you want to enable one more external monitor.

 

Q: How many monitors are supported? Can I use multiple MST hubs for more monitors?

A: Each graphics card can support a maximum number of displays at once, even when using the MST hub. Please check with the manufacturer of the graphics card. Multiple MST hubs can be used. We do not recommend connecting them in a daisy-chain.


Q: Can I use DVI and VGA monitors with the Accell MST hub?

A: Yes. It is recommended to use Accell DisplayPort active adapters if connecting DVI and/or VGA monitors to the MST hub. Make sure you choose the MST Hub with the proper adapter ends for your needs.

USB-C to 3 HDMI 1.4 Multi-display (MST) Hub

 

Product Code:
  • U228B-001B

Minimum System Requirements

  • Windows operating system

  • Graphics card that supports DisplayPort Alt Mode over USB-C. Check with the manufacturer of the graphics card if not sure.

  • Tested compatible devices: Dell XPS 12, Dell XPS 13, HP Elitebook x360 G2, HP ZBook, Surface Book 2

  • Direct connection to a computer. Use of a docking station between the computer and MST hub is not recommended.

 

Vivid Visuals with 4K Resolution
The USB-C multi-monitor hub can simultaneously display up to 4Kx2K resolution on up to 3 monitors. The bandwidth can accommodate an additional monitor up to 1080p.

 

Please note:

  • If the displays do not automatically configure to the maximum supported resolution and refresh rate, please adjust in Display settings

  • If a monitor does not display

  1. You may want to disable the laptop's built-in screen

  2. Try setting the refresh rate to one Hz lower such as 59Hz, 29Hz

 

One Port Does All
The USB Type C input delivers power and data through one cord, eliminating the need for an additional power adapter. The compact design allows you to easily pack the hub for your travels.

 

Mirror or Extend Your Desktop Over 3 Displays
Accell’s USB-C to 3 HDMI Multi-Display Hub connects up to 3 monitors from a single USB-C output. The multi-monitor splitter supports 3 independent displays.

You can view a single image across three displays for gaming, graphic design, or spreadsheet analysis. You can also dedicate each display to a separate application for efficient and productive multitasking. Use 2 MST Hubs with a graphics card with multiple video outputs to connect up to 6 external displays -- ideal for digital signage applications such as video wall configurations.

 

Please note:

  1. 2-hub configurations require a video card with 2 USB-C outputs

  2. The maximum number of displays is limited by the number of Display Pipes. See Video Card manufacturer for details.

Main features of the USB-C to 3 HDMI 1.4 Multi-display (MST) Hub:

  • Utilizes Multi-Stream Transport (MST) protocol

  • Please check if your source device supports the technology

  • Compatible with Thunderbolt 3

  • Data bandwidth up to 5.4 Gbps per lane, 21.6 Gbps total

  • Can simultaneously display 2 Ultra HD resolution

  • Compliant to HDMI 1.4b, HDCP 1.3

  • Advanced WideEye™SerDes Technology capable of receiving data over a long range

 

 

Frequently Asked Questions
Q: Using the Accell MST hub, how can I get my monitors in extended mode? Right now they are mirroring each other.

A: Go to display settings and configure each monitor to Extend mode. If the monitors are not recognised as independent displays, it is likely that the system does not support the MST technology.

 

Q: Using the Accell MST hub, how can I get all of my monitors to display? Only some are displaying.

A: Go to display settings and configure each monitor's resolution and refresh rate. You may want to set the refresh rate to one Hz lower such as 59Hz or 29Hz. Each graphics card can support a maximum number of displays at once, even when using the MST hub. This includes a laptop's built-in screen. You may want to disable the laptop's built-in screen if you want to enable one more external monitor.

 

Q: How many monitors are supported? Can I use multiple MST hubs for more monitors?

A: Each graphics card can support a maximum number of displays at once, even when using the MST hub. Please check with the manufacturer of the graphics card. Multiple MST hubs can be used. We do not recommend connecting them in a daisy-chain.

Q: Can I use DVI and VGA monitors with the Accell MST hub?

A: Yes. It is recommended to use Accell HDMI active adapters if connecting DVI and/or VGA monitors to the MST hub. Make sure you choose the MST Hub with the proper adapter ends for your needs.

Mount Technologies Limited
Eastgate Business Centre
Eastern Avenue
Burton-upon-Trent
DE13 0AT

Telephone : 01283 260 260

© 2019 Mount Technologies

Mount Technologies Limited reserves the right to modify any product specification without prior notice written or otherwise - 2019

  • Facebook Social Icon
  • Twitter Social Icon
  • YouTube Social Icon
K088B-007B - Multi-Display MST Hub