The specialist AV distributor
Call Us On: 01283 260 260
MuxLab CCTV Products



CCTV IP Extender Kit
Product Code: 500110
The CCTV IP Extender Kit (500110) allows any CCTV IP camera to be connected over extended distance via Cat5e or coax cable. The 500110 supports up to two IP cameras up to 650 ft (200m) at 100 Mbps and up to 1 mile (1.6km) at 25Mbps.
-
Extend distance between IP camera and 10/100BaseT LAN
-
Supports up to two (2) IP cameras
-
Cat5e/6 or coax link
-
Up to 650 ft (200m) @ 100Mbps
-
Up to 1 mile (1.6 km) @ 25Mbps
Tariff Code: 8543700000


CCTV IP POE Extender
Product Code: 500111
The CCTV IP PoE Extender allows one IP camera to be connected via a single 75-ohm coax cable in a point-to-point configuration*. The product works in pairs and the power consumption is low enough so that it does not load the PoE source or switch. The maximum distance depends on the grade of coax cable and the power consumption of the camera.
Note: In order to insure optimal operation, MuxLab requires that the 500111 be used in conjunction with a Gigabit PoE Switch.
Tariff Code: 8543700000


CCTV IP POE Extender 2-Pack
Product Code: 500111-2PK
The CCTV IP PoE Extender allows one IP camera to be connected via a single 75-ohm coax cable in a point-to-point configuration*. The product works in pairs and the power consumption is low enough so that it does not load the PoE source or switch. The maximum distance depends on the grade of coax cable and the power consumption of the camera.
Note: In order to insure optimal operation, MuxLab requires that the 500111 be used in conjunction with a Gigabit PoE Switch.
-
Connects IP PoE camera to 10/100BaseT PoE Switch via single coax cable
-
Up to 1,600 ft (500m) @ 10Mbps @ 7W
-
Up to 330 ft (100m) @ 100Mbps @ 14W
-
Used in pairs
-
Preserve investment in legacy coax
-
Ease of migration to IP surveillance
-
Includes (2) CCTV IP Econo PoE Extenders (2 x 500111)
Tariff Code: 8543700000



LongReach CCTV IP PoE Extender Kit
Product Code: 500112
The LongReach CCTV IP PoE Extender Kit allows one CCTV PoE IP camera (up to 15.4 Watts) to be connected up to 1000 ft (300 m) via a single 75-ohm coax cable in a point-to-point configuration to a PoE LAN switch.
Note: If the LAN switch is not PoE, then the 48VDC Power Supply (500113) is required in order to power the PoE camera and the 500112. The maximum distance depends on the grade of coax cable and the power consumption of the camera.
-
Supports one IP PoE camera via one coax cable
-
Supports CCTV IP PoE cameras up to 15.4W
-
Up to 1000 ft (300m) via coax @ 100Mbps/15.4W
-
Up to 330 ft (100m) on the LAN connection
-
LED indicators for power, IP traffic, 100Mbps
-
Optional 48VDC power supply (500113)
-
Includes wall-mount brackets
Tariff Code: 8543700000



LongReach CCTV IP PoE Extender Kit, 30W
Product Code: 500112-30W
The LongReach CCTV IP PoE Extender Kit, 30W allows one IP camera (30 Watts) to be connected up to 980 ft (300 m) via a single 75-ohm coax cable in a point-to-point configuration. The maximum distance depends on the grade and quality of coaxial cable. An optional 48-56VDC (40W) Power Supply can be used if required.
Typical applications:
-
Campuses
-
Highways
-
Airports
-
Hotels and Casinos,
-
Commercial complexes
-
Self-storage
-
Hospitals
-
Supports one IP PoE camera via one coax cable
-
Supports CCTV IP PoE cameras up to 30W
-
Up to 980 ft (300m) via coax @ 100Mbps/30W
-
Up to 330 ft (100m) on the LAN connection
-
LED indicators for power, IP traffic, 100Mbps
-
Includes wall-mount brackets
Tariff Code: 8543700000



LongReach CCTV IP PoE Extender Kit
Product Code: 500114
The LongReach CCTV IP PoE Extender Kit, 1Km (500114) allows one IP camera (15.4 Watts) to be connected up to 3281 ft (1000m) via a single 75-ohm coax cable in a point-to-point configuration. The maximum distance depends on the grade and quality of coaxial cable.
Typical applications:
-
Campuses
-
Highways
-
Airports
-
Hotels and Casinos,
-
Commercial complexes
-
Self-storage
-
Hospitals
-
Supports one IP PoE camera via one coax cable
-
Supports CCTV IP PoE cameras up to 15.4W
-
Up to 3281 ft (1000m) via coax @ 100Mbps
-
Up to 330 ft (100m) on the LAN connection
-
LED indicators for power, IP traffic, 100Mbps
-
Includes wall-mount brackets
Tariff Code: 8543700000



HD-SDI Balun
Product Code: 500701, 500701-2PK
The HD-SDI Balun (500701) allows a single HD-SDI signal to be transmitted up to 150ft / 45m via Cat5e/6 cable at HD resolution in a point-to-point configuration. The HD-SDI Balun supports transmission of up to 1.5 Gbps uncompressed, un-encrypted digital video (optionally including up to 16 channels of embedded Audio and/or embedded Time Code) within television facilities and between professional video equipment.
-
Supports SD and HD (720p, 1080i) resolutions
-
Up to 150ft / 45m via single Cat5e/6 cable @ HD
-
Up to 400ft / 120m via single Cat5e/6 cable @ SD
-
Supports up to 16 channels of embedded Audio and/or embedded Time Code
-
Cast aluminium enclosure for EMI/RFI shielding
Tariff Code: 8517620000



HD CCTV Pass-Thru Balun
Product Code: 500720
The MuxLab 500720 – HD CCTV Pass-Thru Balun allows one HD CCTV (HD-SDI) video channel plus remote power and PTZ control to be transmitted between the HD CCTV camera and the DVR via Cat5e/6 cable in the HD CCTV environment.
The 500720 is used in conjunction with either another 500720 or in conjunction with the MuxLab 500700-CL or 500721.
-
HD-SDI video, power and PTZ over one Cat5e/6
-
Supports SD & HD (1080i) resolutions
-
Works in pairs or with 500720-CL or 500721
-
Supports MuxLab mounting accessories (500900/902/910/915)
Tariff Code: 8517620000


HD CCTV Pass-Thru Balun with Cable Leads
Product Code: 500720-CL
The MuxLab 500720-CL – HD CCTV Pass-Thru Balun with Cable Leads allows one HD CCTV (HD-SDI) video channel plus remote power and PTZ control to be transmitted between the HD CCTV camera and the DVR via Cat5e/6 cable in the HD CCTV environment.
The 500720-CL is used in conjunction with either another 500720-CL or with the 500700 or 500721.
-
HD-SDI video, power and PTZ over one Cat5e/6
-
Supports SD &, HD (1080i) resolutions
-
Works in pairs or with 500720 or 500721
Tariff Code: 8517620000



Active HD CCTV Receiver Balun
Product Code: 500721
The Active HD CCTV Receiver Balun provides extended distance between an HD-SDI CCTV camera and an HD-SDI DVR via Cat5e/6 cable. The product supports up to 150 ft (45m) via Cat5e cable at HD resolution when used in conjunction with MuxLab’s HD CCTV Pass-Thru Balun (500720).
Furthermore, the 500721 allows remote power and 2-wire PTZ control to be combined with HDSDI video over the same Cat5e/6.
-
Supports HD CCTV (HD-SDI)
-
Supports up to 150 feet (45m) @ at HD (720p, 1080i) resolution
-
Supports video, remote power and control over one Cat5e/6
-
Use in conjunction with 500720
-
LED diagnostics: power and SDI sync
-
Supports MuxLab mounting accessories (500900/902/910/915)
Tariff Code: 8543700000


CCTV Modular Balun
Product Code: 500000
The CCTV Modular Balun allows a single composite CCTV video signal to be transmitted via single unshielded twisted pair for more versatile security and surveillance cabling. Used in pairs, the CCTV Balun eliminates costly and bulky coax cable, allowing CCTV equipment to be connected to any convenient modular outlet. Ideal for CCTV installers, end users and resellers. The CCTV Balun may also be used in conjunction with MuxLab’s CCTV-Audio/Video Hub (500200) for distribution to multiple monitors.
-
Up to 2500 feet (760m) in B&W via Cat 5 twisted pair
-
Up to 2200 feet (670m) in colour via Cat 5 twisted pair
-
BNC coax to RJ45 modular (500000)
-
RCA to RJ45 modular (500031)
-
Compact design
-
Weather resistant
Tariff Code: 8517620000


CCTV Screw Terminal Balun
Product Code: 500009, 500009-2PK
The CCTV Screw Terminal Balun allows a single composite CCTV video signal to be transmitted via a single unshielded twisted pair (UTP) cable for more versatile security and surveillance cabling. Used in pairs, the CCTV Balun eliminates costly and bulky coax cable, allowing CCTV equipment to be connected via cost-effective twisted pair. The CCTV Balun may also be used in conjunction with MuxLab’s CCTV-Audio/Video Hub(500200) for video distribution to multiple monitors.
-
Up to 2500 feet (760m) in B&W via Cat 5 twisted pair
-
Up to 2200 feet (670m) in colour via Cat 5 twisted pair
-
Small enough to fit side-by-side on any video multiplexer
-
BNC coax to screw terminals
-
Polarity identification label
-
Cable strain relief
-
Weather resistant
Tariff Code: 8517620000


CCTV Mini Balun
Product Code: 500023
The CCTV Mini Balun allows a single CCTV video signal to be transmitted via cost-effective unshielded twisted pair (UTP) cable. Used in pairs, the CCTV Balun eliminates costly and bulky coaxial cable, allowing CCTV security and surveillance equipment to be connected using standard structured cabling techniques for neater and more streamlined cabling. The flexible mini coax cable lead allows the product to fit neatly inside CCTV camera back boxes and dome camera enclosures. The CCTV Balun also works in conjunction with other MuxLab CCTV baluns such as the 500000, 500009 and 500015 for a complete cabling solution.
-
Fits inside CCTV dome cameras and back boxes
-
Compatible with other MuxLab CCTV baluns
-
Up to 2,200 feet (670m) via Cat 5 UTP
-
Cable strain relief
Tariff Code: 8517620000



CCTV Power-Thru Balun
Product Code: 500024
The CCTV Power-Thru Balun allows video and remote power to be transmitted via one 4-pair Cat5e/6 cable, eliminating the need to install multiple cables for more efficient cabling in the CCTV security and surveillance environment. The Power-Thru Balun may be used in pairs or in conjunction with standard twisted pair cross-connect devices and other MuxLab CCTV baluns such as the 500000, 500009, 500015 and 500023.
-
Combines video and remote power under one 4-pair Cat5e/6 cable for more efficient cabling
-
Video up to 2,200 ft (670m) via Cat5e/6 UTP*
-
Remote power up to 500ft (170m)@ 24VAC/5V via three (3) twisted pairs
Tariff Code: 8517620000



CCTV Power-Thru Balun
Product Code: 500029
The CCTV Power-Thru Balun allows video and remote power to be transmitted via one 4-pair Cat5e/6 cable, eliminating the need to install multiple cables for more efficient cabling in the CCTV security and surveillance environment. The Power-Thru Balun may be used in pairs or in conjunction with standard twisted pair cross-connect devices and other MuxLab CCTV baluns such as the 500000, 500009, 500015 and 500023.
-
Combines video and remote power under one 4-pair Cat5e/6 cable for more efficient cabling
-
Video up to 2,200 ft (670m) via Cat5e/6 UTP
-
Remote power up to 500ft (170m)@ 24VAC/5V via three (3) twisted pairs
Tariff Code: 8517620000



LongReach II Active CCTV Receiver Balun
Product Code: 500124
The LongReach II Active CCTV Receiver Balun (500124) provides extended distance between the CCTV camera and the DVR via Cat5e/6 cable. The product features Auto Gain Control (AGC), Auto-Polarity Correction and supports up to 5,000 ft (1.5 km) via Cat5e/6 cable when used in conjunction with MuxLab
-
Up to 5,000 feet (1.5 km) via Cat5e/6 with passive balun at camera
-
Up to 7,000 feet (2.1 km) via Cat5e/6 with 500100/101 at camera
-
Video, power and PTZ over one Cat5e/6
-
Auto Gain Control (AGC)
-
Auto Polarity Correction
-
Ground Loop Isolation (GLI)
-
Surge Protection
-
LED diagnostics
-
Includes 12VDC power supply
-
Supports MuxLab mounting accessories (500900/902/910/915)
Tariff Code: 8543700000



LongReach II Active CCTV Receiver Hub
Product Code: 500126 [8-PORT], 500127 [16-PORT]
The LongReach II Active CCTV Receiver Hub (500126 [8p], 500127 [16p]) provides extended distance between the CCTV camera and the DVR via Cat5e/6 cable. The hub features Auto Gain Control (AGC) and supports up to 5,000 ft (1.5 km) via Cat5e/6 cable when used in conjunction with MuxLab
-
8 or 16 channel analog CCTV hub
-
Up to 5,000 feet (1.5 km) via Cat5e/6
-
Up to 7,000 feet (2.1 km) via Cat5e/6 with 500100/101 at camera
-
Video, power and PTZ over one Cat5e/6
-
Auto Gain Control (AGC)
-
Auto Polarity Correction
-
Ground Loop Isolation (GLI)
-
LED diagnostics
Tariff Code: 8543700000


PTZ Balun
Product Code: 500007
The PTZ Balun allows CCTV video and “up-the-coax” Pan, Tilt, Zoom (PTZ) control signals to be transmitted via a single unshielded twisted pair (UTP) cable for more versatile cabling. Used in pairs, the PTZ Balun allows CCTV security and surveillance equipment to be integrated into structured cabling systems. Allows CCTV PTZ devices to be moved to any convenient modular wall outlet. The PTZ Balun provides a versatile cabling solution for CCTV security and surveillance by making use of standard UTP cabling techniques to connect digital coax PTZ and video via a single unshielded twisted pair.
-
Steady video image while PTZ is idle
-
Up to 1400 feet via Cat 5 UTP
-
Compact design
-
Neater installation via Velcro mounting strip
-
Low return loss
-
Lifetime warranty
Tariff Code: 8517620000


CCTV Modular Balun
Product Code: 500031
The CCTV Modular Balun allows a single composite CCTV video signal to be transmitted via single unshielded twisted pair for more versatile security and surveillance cabling. Used in pairs, the CCTV Balun eliminates costly and bulky coax cable, allowing CCTV equipment to be connected to any convenient modular outlet. Ideal for CCTV installers, end users and resellers. The CCTV Balun may also be used in conjunction with MuxLab’s CCTV-Audio/Video Hub (500200) for distribution to multiple monitors.
-
Up to 2500 feet (760m) in B&W via Cat 5 twisted pair
-
Up to 2200 feet (670m) in colour via Cat 5 twisted pair
-
BNC coax to RJ45 modular (500000)
-
RCA to RJ45 modular (500031)
-
Compact design
-
Weather resistant
Tariff Code: 8517620000


LongReach
Product Code: 500015
The LongReach is an Active CCTV Receiver Balun that provides extended distance between the CCTV camera and the DVR or multiplexer via copper twisted pair cable. The LongReach features Automatic Image Adjustment for picture brightness, sharpness and contrast, thereby helping to reduce on-site service calls. The LongReach supports up to 5,000 ft (1,5 km) via Category 5 twisted pair cable when used in conjunction with MuxLab’s passive CCTV Baluns (500000 & 500009).
-
Automatic Image Adjustment - helps eliminate service calls
-
Up to 5,000 feet (1.5km) via Cat 5 UTP
-
Connects directly to the DVR, multiplexer or switcher
-
Works with MuxLab passive CCTV Baluns
-
Eliminates the need for fiber or coax
-
Supports NTSC or PAL
-
Requires 24VAC (Not supplied)
-
Ground loop blocking
-
Voltage surge protection
-
Auto-resettable fuse
-
LEDs for power, video and ground loop fault
-
Cable strain relief
-
1 year warranty
Tariff Code: 8543700000


CCTV Pass-Thru Balun
Product Code: 500022
The CCTV Pass-Thru Balun allows video, 2-wire PTZ control and remote power to be transmitted via one 4-pair Cat5e/6 cable, thus eliminating the need to install multiple cables for more efficient cabling in the CCTV security and surveillance environment. The Pass-Thru Balun may be used in pairs or in conjunction with standard twisted pair cross-connect devices and other MuxLab CCTV baluns such as the 500000, 500009, 500023 and 500015.
-
Combines video, PTZ control and remote power under one 4-pair Cat 5 cable for more efficient cabling
-
Video up to 2,200 ft (670m) via Cat 5 UTP
-
Remote power up to 350ft (106m)@ 24VAC/5VA via two (2) twisted pairs
Tariff Code: 8517620000


CCTV Power-Thru Converter Balun
Product Code: 500024-CNV
The CCTV Power-Thru Converter Balun allows video and remote power to be transmitted via one 4-pair Cat5e/6 cable, thus eliminating the need to install multiple cables for more efficient cabling in the analog CCTV security and surveillance environment.
Additionally, the product converts 24VAC to 12VDC to allow 12VDC cameras to be remotely powered from a central 24VAC CCTV power supply. The CCTV Power-Thru Converter Balun is installed at the camera side and works in conjunction with MuxLab’s CCTV Power-Thru Balun (500024), Passive CCTV Power Integrator Hub (500136) or Passive CCTV Hub (500130) for a complete cabling solution
-
Video and remote power via one 4-pair Cat5e/6 cable
-
Converts 24VAC to 12VDC/400mA at the camera
-
Video up to 2,200 ft (670m) via Cat 5e/6 UTP*
-
Transmits 24VAC up to 795 ft (242m) @ 400mA max
-
Installed at the camera side
-
Works with 500024/130/124/126/127/136
-
Shorter distances may result with certain models of DVR
Tariff Code: 8517620000


Quad Video Balun
Product Code: 500037
The Quad Video Balun allows up to four (4) composite video signals to be transmitted via unshielded twisted pair (UTP) cable in a point-to-point connection. Used in pairs, the Quad Video Balun eliminates up to four (4) coaxial cables, allowing audio-video equipment to be connected via space-efficient and cost-effective Category 5 twisted pair cable. The Quad Video Balun also works in conjunction with other MuxLab composite video baluns such as the 500000, 500009 and 500021.
-
Cost-efficient cabling - save up to four (4) cables
-
Composite video up to 2,200 ft (670m) via Cat 5
-
Component video up to 500 ft (152m) via Cat 5 (480i/p only)
-
Compact design for neater wiring


Active CCTV Transmitter Balun
Product Code: 500100, 500101
The Active CCTV Transmitter Balun (500100, 500101) provides enhanced distance performance for a single CCTV video channel via Cat5 unshielded twisted pair (UTP) cable. The balun is installed at the CCTV camera and is powered by the camera power supply. There are two (2) models; 500100 for 12VDC cameras and 500101 for 24VAC cameras. Maximum distance supported ranges from 0 to 3,000 ft via Cat5 UTP when connected to passive CCTV baluns at the receiver. Active CCTV Transmitter Balun features ground loop isolation and manual gain compensation adjustment based on cable length. Applications; Video enhancement for colour, sharpness and brightness. Ground loop sensitive installations. Marginal cabling installations.
-
Low power consumption
-
Derives power from camera power supply
-
Ground loop isolation
-
Gain compensation switch for 500 to 3,000 ft
-
Fits inside CCTV dome cameras and back boxes.
-
Works with other MuxLab CCTV baluns
-
Cable strain relief
Tariff Code: 8543700000


LongReach 16 Port Active CCTV Hub
Product Code: 500120, 500121, 500122, 500123
The LongReach™ 16 is a sixteen (16) port active CCTV receiver hub with full Automatic Image Adjustment, providing a true plug-and-forget CCTV cabling solution up to 4,500 ft (1,371m) via Category 5 twisted pair cable. The LongReach 16 automatically optimises picture brightness, sharpness and contrast based on cable length, thereby eliminating the need for manual adjustments.
The LongReach 16 is available in two (2) models: 500120/500121 for UTP output and the 500122/500123 for coax output depending on the application. The product works in conjunction with MuxLab’s standard CCTV Baluns (500000, 500009, 500022 and 500023
-
Auto Gain Control (AGC) on each port
-
Up to 4,500 feet (1066m) via Cat 5 UTP
-
Supports NTSC, PAL and SECAM
-
Ground Loop Isolation up to +/-50V
-
Fuse protection
-
LEDs for power and video sync
-
Requires 24VAC (included)
-
1 year warranty


CCTV Pass-Thru/GLI Balun
Product Code: 500132
The CCTV Pass-Thru/GLI Balun allows video, remote power and 2-wire PTZ control to be transmitted via one 4-pair Cat 5 cable and is designed for installations where ground loop issues may be present. The product features ground loop isolation (GLI) and is installed either at the camera or DVR side in conjunction with other standard MuxLab CCTV baluns such as the 500009, 500022, 500024/29 and 500130.
-
Video, power and PTZ over one Cat 5 cable
-
Video up to 2,200 ft (670m) via Cat 5 UTP*
-
Ground Loop Isolation (GLI)
-
May be installed at camera or DVR side
* Shorter distances may result with certain models of DVR
Tariff Code: 8517620000


Passive CCTV/GLI Hub
Product Code: 500133
The Passive CCTV/GLI 16-Port Hub allows video, remote power and PTZ control to be transmitted via one Cat5 cable, thus eliminating the need to install multiple cables for more efficient cabling in the security video environment. The product features full DC isolation for CCTV systems where ground loops may be present. The product works in conjunction with all MuxLab CCTV baluns, including the 500000R, 500009, 500022, 500024, 500100 and 500101.
-
Ground Loop Isolation (GLI) on each port
-
Port switch to set Power-Thru or Pass-Thru mode
-
Pin configuration table on unit
-
Space efficient, rack mountable
Tariff Code: 8543700000


Passive CCTV Hub Plus
Product Code: 500134
The Passive CCTV Hub Plus allows video, remote power and PTZ control to be transmitted via one Cat5e/6 cable, thus eliminating the need to install multiple cables for more efficient cabling in the security video environment. The hub includes a detachable, factory-installed, 16-channel power cable assembly that allows the hub to be connected to a 16-channel CCTV power supply for greater ease of installation.
-
Port switch to set Power-Thru or Pass-Thru mode
-
Includes 16-channel power cable assembly
-
Pin configuration table on unit
-
Space efficient, rack mountable
Tariff Code: 8543700000


Passive CCTV Power Integrator Hub
Product Code: 500136
The Passive CCTV Power Integrator Hub allows video, remote power and PTZ control to be transmitted via one Cat5e/6 cable, thus eliminating the need to install multiple cables for more efficient cabling in the security video environment. The product features a built-in 16-channel 350VA CCTV power supply that supplies power to each port and works in conjunction MuxLab
-
Built-in 16-channel 350VA PSU
-
Port configuration: Power-Thru(500024) or Pass-Thru (500022) mode
-
Port selectable voltage: 24VAC, 28VAC, "OFF"
-
2U rack height
Tariff Code: 8543700000