MuxLab VGA Distribution

VGA Balun II

Product Code: 500040, 500041, 500042

The VGA Balun II eliminates costly and bulky VGA cable, allowing a VGA source to be connected to a VGA monitor via one (1) 4-pair Cat 5 unshielded twisted pair (UTP) cable.

 

500040 – HD15 male, Source side

500041 – HD15 female, Source side

500042 – HD15 female, Display side

Used in pairs, the VGA Balun II allows VGA video to be transmitted up to 350ft (107m) via Cat 5 at 800 x 600 resolution. Each VGA connection requires p/n 500040 or 500043 at the source and either p/n 500041 or 500042 at the display. The product features a “reset” button that may be required when using certain displays. More information may be found in the product Installation Guide.

 

The VGA Balun II works in conjunction with laptops, PCs, plasmas, CRT, LCD monitors and DLP projectors.

Typical applications 

  • Digital signage

  • Boardroom systems

  • Classroom video instruction

  • Custom audio-video systems

  • Fully supports Cat5e/6 UTP

  • Cost efficient versus VGA cable

  • Use existing structured cabling system

  • Save conduit space

  • Reset button on units may be required with certain sync-sensitive displays.

Model 500043 discontinued. Not compatible with 500010, 500011 or 500014. Does not support DDC handshaking.

VGA Over CAT 5 Extender Set (1x 500040 & 1x 500042) 

Product Code: 500040-42-PK

The VGA Balun II (500040-42-PK) eliminates costly and bulky VGA cable, allowing a VGA source to be connected to a VGA monitor via one (1) 4-pair Cat5e/6 cable. Used in pairs, the VGA Balun II allows VGA video to be transmitted up to 107m (350 ft) via Cat5e/6 at 800 x 600 resolution.

 

  • Fully supports Cat5e/6

  • Cost efficient versus VGA cable

  • Use existing structured cabling system

  • Save conduit space

  • Includes (1) 500040 VGA Balun II, HD15 HD Plug, PC Side & (1) 500042 VGA Balun II, HD15 HD Plug, Monitor Side

VGA over CAT 5 Wall Plate Balun - PC Side

 
Product Code: 500043-WP-UK

The VGA Wall Balun II (500041-WP-UK, 500043-WP-UK) eliminates costly and bulky VGA cable, allowing a VGA source to be connected to a VGA monitor via one (1) Cat5e/6 cable. The VGA Wall Balun II allows VGA video to be transmitted up to 107m (350 ft) via Cat5e/6 at 800 x 600 resolution.

 

  • Fully supports Cat5e/6

  • Cost efficient versus VGA cable

  • Compatible with UK standard 86mm x 86mm back boxes

  • Compatible with 50mm x 50mm faceplate opening

  • Saves conduit space

Active VGA Over CAT 5 Extender Set

 
Product Code: 500140

The Active VGA Balun II Kit allows VGA or component video to be transmitted via Cat5e/6 cable in a point-to-point configuration. The product supports remote power pass-thru and is DDC compliant with all "plug-and-play" laptops, PC's, and monitors / displays. 

 

  • Up to 180m (600 ft) via Cat5e/6 @ 1920 x 1440 resolution

  • Up to 180m (600 ft) via Cat5e/6 @ 1080p resolution

  • Remote power pass-thru up to 46m (150 ft) - beyond this, PSU is required

  • DDC1 / DDC2 (Plug-and-Play) Compliant

  • Manual gain compensation

  • Local monitor output on Tx

  • 500140 (Kit), 500141 (Tx), 500142 (Rx), 500144 (PSU 12VDC)

Active VGA Over CAT 5 Transmitter (No PSU)

 
Product Code: 500141

The Active VGA Balun II Transmitter allows VGA or component video to be transmitted via Cat5e/6 cable in a point-to-point configuration (when used with the 500142 - receiver). The product supports remote power pass-thru and is DDC compliant with all "plug-and-play" laptops, PC's, and monitors / displays.

 

  • Up to 180m (600 ft) via Cat5e/6 @ 1920 x 1440 resolution

  • Up to 180m (600 ft) via Cat5e/6 @ 1080p resolution

  • Remote power pass-thru up to 46m (150 ft) - beyond this, PSU is required

  • DDC1 / DDC2 (Plug-and-Play) Compliant

  • Manual gain compensation

  • Local monitor output on Tx

  • 500140 (Kit), 500141 (Tx), 500142 (Rx), 500144 (PSU 12VDC)

Active VGA over CAT 5 Receiver (No PSU)

 
Product Code: 500142

The Active VGA Balun II Receiver allows VGA or component video to be transmitted via Cat5e/6 cable in a point-to-point configuration (when used with the 500141 - transmitter). The product supports remote power pass-thru and is DDC compliant with all "plug-and-play" laptops, PC's, and monitors / displays.

 

  • Up to 180m (600 ft) via Cat5e/6 @ 1920 x 1440 resolution

  • Up to 180m (600 ft) via Cat5e/6 @ 1080p resolution

  • Remote power pass-thru up to 46m (150 ft) - beyond this, PSU is required

  • DDC1 / DDC2 (Plug-and-Play) Compliant

  • Manual gain compensation

  • 500140 (Kit), 500141 (Tx), 500142 (Rx), 500144 (PSU 12VDC)

Power Supply (PSU) for Active VGA Over CAT 5 Extender 

 
Product Code: 500144

The Active VGA Balun II Kit allows VGA or component video to be transmitted via Cat5e/6 cable in a point-to-point configuration. The product supports remote power pass-thru and is DDC compliant with all "plug-and-play" laptops, PC's, and monitors / displays.

 

  • Up to 180m (600 ft) via Cat5e/6 @ 1920 x 1440 resolution

  • Up to 180m (600 ft) via Cat5e/6 @ 1080p resolution

  • Remote power pass-thru up to 46m (150 ft) - beyond this, PSU is required

  • DDC1 / DDC2 (Plug-and-Play) Compliant

  • Manual gain compensation

  • Local monitor output on Tx

  • 500140 (Kit), 500141 (Tx), 500142 (Rx), 500144 (PSU 12VDC)

Active VGA & Audio Over CAT 5 Extender Set w.IR/RS232 

 
Product Code: 500145

The Active VGA / Audio Balun Kit (500145) allows VGA and stereo (3.5mm jack) or digital audio (Coax) to be transmitted over distances of up to 180m (600 ft) via single Cat5e/6 cable in a point-to-point configuration.

 

  • Up to 180m (600 ft) via Cat5e/6 @ 1920 x 1200 resolution

  • Supports analogue stereo or digital audio (Coax)

  • Supports RS232 or IR control

  • DDC1 / DDC2 (Plug-and-Play) Compliant

  • Brightness, sharpness and skew adjustments

  • Local VGA / Audio monitor output

  • Ground loop isolation

  • 500145 [kit], 500146 [TX], 500147 [RX]

Active VGA & Audio Over CAT 5 Transmitter (PSU included) 

 
Product Code: 500146

The Active VGA/Audio Balun Transmitter (500146) allows VGA and stereo (3.5mm jack) or digital audio (Coax) to be transmitted via cost-efficient unshielded copper twisted cable in a point-to-point configuration when used with the 500147 - Receiver.

 

  • Up to 180m (600 ft) via Cat5e/6 @ 1920 x 1200 resolution

  • Supports analogue stereo or digital audio (Coax)

  • Supports RS232 or IR control

  • DDC1 / DDC2 (Plug-and-Play) Compliant

  • Brightness, sharpness and skew adjustments

  • Local VGA / Audio monitor output

  • Ground loop isolation

  • 500145 [kit], 500146 [TX], 500147 [RX]

Active VGA & Audio Over CAT 5 Receiver (PSU Included) 

 
Product Code: 500147

The Active VGA/Audio Balun Receiver (500147) allows VGA and stereo (3.5mm jack) or digital audio (Coax) to be received via cost-efficient unshielded copper twisted cable in a point-to-point configuration when used with the 500146 - Transmitter. 

 

  • Up to 180m (600 ft) via Cat5e/6 @ 1920 x 1200 resolution

  • Supports analogue stereo or digital audio (Coax)

  • Supports RS232 or IR control

  • DDC1 / DDC2 (Plug-and-Play) Compliant

  • Brightness, sharpness and skew adjustments

  • Local VGA / Audio monitor output

  • Ground loop isolation

  • 500145 [kit], 500146 [TX], 500147 [RX]

4-Way VGA Distribution Hub

 
Product Code: 500151

The VGA 1x4 Distribution Hub allows one (1) remote VGA (RGBHV) source to be distributed up to up to four (4) remote displays all via Cat5e/6 cable for more cost-efficient cabling. The hub works in conjunction with the Active VGA Balun II Kit (500140 - 1x TX / 1x Rx) and Active VGA Balun II Receivers (500142). 

 

  • Plug and Play - DDC1 and DDC2 Compliant

  • Remote power up to 46m (150 ft)

  • Modular RJ45 on input and output

  • Supports up to 1920 x 1440, 1080p resolutions

  • Ground loop isolation on every port

  • Works in conjunction with 500140 (VGA kit) and 500142 (VGA receiver)

4x1 VGA Switcher  

 
Product Code: 500161

The VGA 4x1 Switcher allows up to four (4) VGA (RGBHV) sources to be switched to one (1) display via single Cat5e/6 cable for more cost-efficient cabling. The switcher works in conjunction with the Active VGA Balun II Kit (500140) and Active VGA Balun II Transmitter (500141).

 

  • Auto and Manual switching modes

  • Control via: manual, IR, RS232 and USB

  • Plug and Play - DDC Compliant

  • Remote power up to 46m (150 ft)

  • Modular RJ45 on input and output

  • Supports up to 1920 x 1440, 1080p resolutions

  • Includes GUI software and IR remote

  • Works in conjunction with 500140 / 141 / 142

  • May be cascaded with VGA 1x4 Hub (500150)

8-Way Active VGA Dispatch Hub  

 
Product Code: 500170

The Active VGA Managed System (AVM) is a total digital signage systems solution to be installed and managed more efficiently via a single Cat5e/6 structured cabling system. 

 

  • Dispatcher Hub distributes up to 8 or 16 displays

  • Repeater Hub adds another 305m (1,000 ft) distance and distributes to 8 more receivers

  • Receiver supports dual VGA output and VESA mounting

  • Manual and software gain / skew control

  • MuxLab Control Software for gain / skew and display scripts

  • Control via GUI, RS232, Web

  • System includes: Active VGA Managed Dispatcher, 8-port (500170), Active VGA Managed Dispatcher, 16-port (500171), Active VGA Managed Repeater, 8-port (500172), Active VGA Managed Receiver, Dual Head (500174)

16-Way Active VGA Dispatch Hub  

 
Product Code: 500171

The Active VGA Managed System (AVM) is a total digital signage systems solution to be installed and managed more efficiently via a single Cat5e/6 structured cabling system. 

 

  • Dispatcher Hub distributes up to 8 or 16 displays

  • Repeater Hub adds another 305m (1,000 ft) distance and distributes to 8 more receivers

  • Receiver supports dual VGA output and VESA mounting

  • Manual and software gain / skew control

  • MuxLab Control Software for gain / skew and display scripts

  • Control via GUI, RS232, Web

  • System includes: Active VGA Managed Dispatcher, 8-port (500170), Active VGA Managed Dispatcher, 16-port (500171), Active VGA Managed Repeater, 8-port (500172), Active VGA Managed Receiver, Dual Head (500174)

8-Way Active VGA Repeater   

 
Product Code: 500172

The Active VGA Managed System (AVM) is a total digital signage systems solution to be installed and managed more efficiently via a single Cat5e/6 structured cabling system.

 

  • Dispatcher Hub distributes up to 8 or 16 displays

  • Repeater Hub adds another 305m (1,000 ft) distance and distributes to 8 more receivers

  • Receiver supports dual VGA output and VESA mounting

  • Manual and software gain / skew control

  • MuxLab Control Software for gain / skew and display scripts

  • Control via GUI, RS232, Web

  • System includes: Active VGA Managed Dispatcher, 8-port (500170), Active VGA Managed Dispatcher, 16-port (500171), Active VGA Managed Repeater, 8-port (500172), Active VGA Managed Receiver, Dual Head (500174

Dual Head Active VGA Receiver    

 
Product Code: 500174

The Active VGA Managed System (AVM) is a total digital signage systems solution to be installed and managed more efficiently via a single Cat5e/6 structured cabling system.

 

  • Dispatcher Hub distributes up to 8 or 16 displays

  • Repeater Hub adds another 305m (1,000 ft) distance and distributes to 8 more receivers

  • Receiver supports dual VGA output and VESA mounting

  • Manual and software gain / skew control

  • MuxLab Control Software for gain / skew and display scripts

  • Control via GUI, RS232, Web

  • System includes: Active VGA Managed Dispatcher, 8-port (500170), Active VGA Managed Dispatcher, 16-port (500171), Active VGA Managed Repeater, 8-port (500172), Active VGA Managed Receiver, Dual Head (500174

Mount Technologies Limited
Eastgate Business Centre
Eastern Avenue
Burton-upon-Trent
DE13 0AT

Telephone : 01283 260 260

© 2019 Mount Technologies

Mount Technologies Limited reserves the right to modify any product specification without prior notice written or otherwise - 2019

  • Facebook Social Icon
  • Twitter Social Icon
  • YouTube Social Icon