MuxLab HDMI over CAT Extenders

HDMI Bi-IR Extender Kit

 

Product Code: 500404

The HDMI / Bi-IR Extender Kit allows HDMI equipment to be connected over single Cat5e /6 cable in a point-to-point configuration. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter and IR Sensor for remote control applications. Four (4) mounting Ears are also provided for wall-mount applications.

 

  • 40m (130 ft) at 1080p over Cat5e/6

  • 70m (230ft) at 1080i/720p over Cat6

  • 50m (164ft) at 1080i/720p over Cat5e

HDMI Extender Kit, HDBaseT Lite, UHD-4K, PoE

 

Product Code: 500451-PoE

The HDMI Extender Kit (500451-POE) allows HDMI equipment to be connected up to 40m at 4K resolutions or 70m at resolutions up to 1080p via single Cat5e/6 cable in a point-to-point configuration. For ease of cabling the extender kit features PoE (TX to RX). This kit comes with one (1) transmitter and one (1) receiver.

 

  • Supports 1080p Deep Colour and full 3D to distances of up to 70m over single Cat5e/6

  • Supports 4K @ 24/25/30fps to distances of up to 40m

  • Supports Bi-directional IR pass through

  • Supports all digital audio modes

  • PoE from transmitter to receiver unit

  • Includes IR emitter (500998) and IR sensor (500999)

  • Compatible with 500451 (non PoE) and MuxLab PoE HDBaseT matrices

HDMI/LAN Extender Kit, HDBaseT, UHD-4K

Product Code: 500453

The HDMI/LAN Extender Kit (500453) allows HDMI equipment to be connected up to 100m @ 4K resolution via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. Furthermore, the product supports up to two Ethernet 10/100 connections on both the Tx and Rx. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter (500998) and IR Sensor (500999) for remote control applications.

 

  • Up to 100m at all resolutions up to 4K/30Hz via single Cat5e/6

  • Supports all digital audio modes

  • Supports Ethernet with two LAN ports on each balun

  • Supports bi-directional IR remote control

  • Includes IR Emitter and IR Sensor

  • Locking screw for HDMI connector

HDMI/RS232 Extender Kit, HDBaseT Lite, UHD-4K

Product Code: 500454/500454-PoE

The HDMI/RS232 Extender Kit (500454, 500454-POE) allows HDMI equipment to be connected up to 70m at all resolutions up to 1080p via single Cat5e/6 cable in a point-to-point configuration. Furthermore, the product supports RS232 to allow control commands to be transmitted between transmitter and receiver. The product is available in a “PoE” configuration to allow the HDMI/RS232 Receiver to be powered by the transmitter for greater ease of cabling.

 

  • Supports 3D of HDMI 1.4

  • Up to 70m at all resolutions up to 1080p via single Cat5e/6, 4K/30Hz to 40m

  • PoE version (optional)

  • Supports all digital audio modes

  • Supports RS232 pass through

  • Supports bi-directional IR remote source control

  • Includes IR Emitter (500998) and IR Sensor (500999)

HDMI - VGA/Audio Wall-Plate Transmitter, UHD-4K

Product Code: 500455-TX

The HDMI – VGA/Audio Wall-Plate Transmitter is a HDBaseT transmitter unit that provides a convenient interface for HDMI / VGA input sources. It has one (1) HDMI input, one (1) VGA input, one (1) Audio input, and one (1) HDBaseT Lite output. It supports VGA with full HD scaler, and HDMI 1.4 with 4K & 3D, input signals support other auto and manual switching ability. The HDBaseT output supports 70m video transmission, enables bi-directional RS232 communication between HDMI – VGA/Audio Wall-Plate Transmitter and remote device. The unit is powered by a 12VDC Power Supply.

 

  • Selectable HDMI/VGA with audio input

  • Support of VGA output resolutions up to 1920x1200

  • Built-in scaler function supports scaling HDMI/VGA signals to match the native resolution of the display

  • Transmission of HDMI signals up to 4K/30Hz

  • Compliant with HDMI 1.4, supports 1080p and 3D

  • HDCP compliant, equipped with HDCP auto tracking solution

  • Auto-switching capability

  • Support of multiple control methods including front panel buttons and RS232. Serial interface supports bi-directional RS232 pass-through control

  • Powered by local 12VDC power supply.

  • Aluminium design

HDMI / HDBaseT ‘4-Play’ Extender Kit

Product Code: 500456

The HDMI ‘4-Play’ Extender Kit allows HDMI equipment to be connected up to 100m @ 1080p Deep Colour via single Cat5e/6 in a point-to-point configuration. The product features one LAN port for interconnecting Ethernet equipment and an RS232 port for control via the same Cat5e/6 cable. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter (500998) and IR Sensor (500999) for remote control applications.

 

  • Supports 1080p deep colour, 4K/30Hz & 3D resolutions

  • Up to 100m via single Cat5e/6

  • Supports LAN, Bi-directional IR & RS232

  • Supports all digital audio mode

  • Compatible with all other MuxLab HDBaseT extenders

HDMI / USB 2.0 Extender Kit, HDBT, 4K60

Product Code: 500457

The HDMI/USB 2.0 Extender Kit allows one HDMI 1.4 and one USB 2.0 channel to be transmitted up to 330ft (100m) at all resolutions up to 1920×1200 @ 60Hz via one (1) Cat 5e/6 cable in a point-to-point configuration. The receive side includes a 4-port USB 2.0 hub, supporting KVM applications. Bi-directional IR transmission is supported.

 

  • Supports HDMI 4K @ 30fps (4:4:4)

  • Supports HDMI 4K @ 60fps (4:2:0)

  • Uncompressed signal transmission

  • USB 2.0 (250Mbps max)

  • Receiver side includes a 4-port USB hub, supporting KVM applications

  • Up to 330ft (100m) over Cat5e/6 at 4K30

  • Supports bi-directional IR transmission

3G-SDI /RS232 over IP Extender Kit with POE

 

Product Code: 500757, 500757-TX, 500757-RX

The HDMI over IP H.264 PoE Extender Kit allows HDMI source and display equipment to be connected in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. Connectivity may be up to 330ft (100m) @ 1080p via Cat5e/6 UTP cable, and the device supports PoE (PD) if used with a PoE (PSE) Ethernet Switch.

Typical Applications:

  • Commercial and residential AV systems

  • Classroom projector systems

  • Digital signage

  • Boardroom systems

  • Collaborative PC systems

  • Medical information systems

Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500993) may be purchased separately.

KVM HDMI over IP POE Extender Kit

 

Product Code: 500770, 500770-TX, 500770-RX

The KVM HDMI over IP PoE Extender Kit allows HDMI & USB equipment to be connected up to 330ft (100m) over an Ethernet LAN, supporting 1920×1200 and 1080p resolution @ 60Hz via Cat5e/6 cable in multiple point-to-point and point-to-multipoint configurations. The Transmitter (500770-TX) and Receiver (500770-RX) support PoE (PD) if used with a PoE (PSE) Ethernet Switch.

 

The Transmitter terminates to a computer server/workstation via an HDMI & USB port, The Receiver terminates to an HDMI display and up to 4 USB devices such as a keyboard, mouse, printer, drawing pad, storage device, camera, etc., via a 4 port USB hub. A single Receiver can be switched via hotkey sequences to any Transmitter on the network, allowing a single operator to manage numerous servers/workstations, in a distributed KVM application.

Typical Applications:

  • Management of multi-server systems supporting HDMI displays in IT departments within corporations

  • Educational institutions

  • CAD Design

  • Graphic Design

  • Media Servers

  • Data Centers

  • One operator can manage multiple servers/workstations

  • Supports HDMI up to 1920x1200 and 1080p @ 60Hz

  • Receiver side includes a 4-port USB hub, for KVM applications

  • Up to 330ft (100m) over Cat5e/6

  • Supports 100’s of Transmitters & Receivers depending on network bandwidth

  • Supports multiple point-to-point, and point-to-multipoint applications

  • Supports audio insert & mic-out (TX), and audio extract & mic-in (RX)

HDMI/RS232 Extender Kit, POE, HDBT, UHD-4K

 

Product Code: 500454-POE, 500454-POE-TX,500454-POE-RX

The HDMI/RS232 Extender Kit (500454-PoE) allows HDMI equipment to be connected up to 131ft (40m) at 4K/30 (4:4:4) or 4K/60 (4:2:0) resolutions, or 230 ft (70 m) at resolutions up to 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. For ease of cabling the extender kit features PoE (PD), including PoC, on both the transmitter and receiver. The unit supports RS232 and bidirectional IR for end devices remote control. This kit comes with one (1) transmitter, one (1) receiver, one (1) IR Emitter, and one (1) IR sensor.

Typical Applications:

  • Digital signage

  • Commercial AV systems

  • Classroom projector systems

  • Boardroom systems

  • Collaborative PC systems

  • Medical information systems

  • Supports 1080p deep colour and full 3D to distances of up to 230 ft (70m) over single Cat5e/6

  • Supports 4K @ 24/25/30Hz (4:4:4) and 4K/60 (4:2:0) to distances of up to 131 ft (40m) over single Cat5e/6

  • Supports RS232

  • Supports Bi-directional IR pass through

  • Supports all digital audio modes

  • PoE (PD) & PoC on both the transmitter and receiver

  • Includes IR emitter and IR sensor (carrier-wave)

  • Compatible with 500454 (non PoE version)

HDMI/RS232 over IP Extender Kit with POE

 

Product Code: 500753, 500753-TX, 500753-RX

The HDMI / RS232 over IP Extender Kit with PoE allows HDMI equipment to be connected up to 330feet (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several Transmitters and Receivers to the same Ethernet network. The Transmitter (500753-TX) and Receiver (500753-RX) also support PoE (PD) if used with a PoE (PSE) Ethernet Switch. The kit comes with one (1) Transmitter and one (1) Receiver. The IR Emitter and IR Sensor, if required, may be purchased separately for remote control applications.

 

For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. MuxLab recommends using the Cisco SG300 Series Managed Switches.

 

The MuxLab Pro Digital Network Controller (500811) is available to simplify the configuration and utilisation of the MuxLab IP based products via an Ethernet web interface, and supports third party management via smartphone and tablet.

 

Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500992) may be purchased separately.

Typical Applications:

  • Commercial and residential AV systems

  • Classroom projector systems

  • Digital signage

  • Boardroom systems

  • Collaborative PC systems

  • Medical information systems.

  • HDMI 1.3

  • Supports up to 1080p resolutions

  • Motion JPEG compression with Very low latency

  • Supports 100’s of Transmitters and Receivers, depending on network bandwidth

  • Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications

  • Transmission up to 330 ft (100m) over Cat5e/6

  • Up to 390 ft (120m) between the TX and RX when no LAN switch is used

  • Supports RS232 and IR transmission for remote control

  • PoE powered

  • Control via any web device (mobile, tablet) with use of model 500811 (Pro Digital Network Controller)

HDMI 4K over IP POE Extender Kit

 

Product Code: 500758, 500758-TX, 500758-RX

The HDMI 4K over IP PoE Extender Kit allows HDMI equipment to be extended up to 330ft (100m) up to 4K (3840×2160) resolution @ 30Hz via one (1) Cat5e/6 cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint configurations are also possible by connecting several units to the same local Ethernet network, and the device supports PoE (PD) if used with a PoE (PSE) Ethernet Switch.

Typical Applications:

  • Commercial and residential AV systems

  • Classroom projector system

  • Digital signage

  • Boardroom systems

  • Collaborative PC systems

  • Medical information systems

Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500993) may be purchased separately.

  • Supports HDMI up to 4K @ 30Hz (4:4:4)

  • Supports 100’s of Transmitters & Receivers depending on network bandwidth

  • Extend HDMI up to 330ft (100m) over Cat5e/6

  • Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications

  • Supports audio insert (TX) & audio extract (RX)

  • Supports RS232 and IR transmission for remote control

HDMI over IP Extender with PoE

 

Product Code: 500752, 500752-RX, 500752-TX

The HDMI over IP Extender Kit with PoE allows HDMI equipment to be connected up to 330feet (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several Transmitters and Receivers to the same Ethernet network. The Transmitter (500752-TX) and Receiver (500752-RX) also support PoE (PD) if used with a PoE (PSE) Ethernet Switch. The kit comes with one (1) Transmitter and one (1) Receiver. The IR Emitter and IR Sensor, if required, may be purchased separately for remote control applications.

 

For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. MuxLab recommends using the Cisco SG300 Series Managed Switches.

 

The MuxLab Pro Digital Network Controller (500811) is available to simplify the configuration and utilisation of the MuxLab IP based products via an Ethernet web interface, and supports third party management via smartphone and tablet.

 

Typical Applications:

  • Commercial and residential AV systems

  • Classroom projector systems

  • Digital signage

  • Boardroom systems

  • Collaborative PC systems

  • Medical information systems

 

Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500992) may be purchased separately.

  • HDMI 1.3

  • Supports up to 1080p resolutions

  • Motion JPEG compression with Very low latency

  • Supports 100’s of Transmitters and Receivers, depending on network bandwidth

  • Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications

  • Transmission up to 330ft (100m) over Cat5e/6

  • Up to 390ft (120m) between the TX and RX when no LAN switch is used

  • Supports IR transmission for remote control

  • PoE powered

  • Control via any web device (mobile, tablet) with use of model 500811 (Pro Digital Network Controller)

HDMI over IP H.264/H.265 PoE Extender

 

Product Code: 500762, 500762-RX, 500762-TX

The HDMI over IP H.264/H.265 PoE Extender Transmitter and Receiver combination allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 1080p @ 60Hz video and streams the content to the Receiver, where the signal is up-scaled up to 4K @ 60Hz to be displayed on a 4K monitor. The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60Hz, and supports a USB 3.0 Type A connector for storing and playback of local content from an external USB drive.

 

Typical Applications:

  • Commercial and residential AV systems

  • Classroom projector systems

  • Digital signage

  • Boardroom systems

  • Collaborative PC systems

  • Medical information systems

 

Note: These devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.

  • HDMI 1.3

  • Supports up to 1080p resolutions

  • Motion JPEG compression with Very low latency

  • Supports 100’s of Transmitters and Receivers, depending on network bandwidth

  • Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications

  • Transmission up to 330ft (100m) over Cat5e/6

  • Up to 390ft (120m) between the TX and RX when no LAN switch is used

  • Supports IR transmission for remote control

  • PoE powered

  • Control via any web device (mobile, tablet) with use of model 500811 (Pro Digital Network Controller)

Mount Technologies Limited
Eastgate Business Centre
Eastern Avenue
Burton-upon-Trent
DE13 0AT

Telephone : 01283 260 260

© 2019 Mount Technologies

Mount Technologies Limited reserves the right to modify any product specification without prior notice written or otherwise - 2019

  • Facebook Social Icon
  • Twitter Social Icon
  • YouTube Social Icon