On Controls | Hardware | Mount Technologies Limited

On Controls Hardware

On-Link Wired TCP/IP to IR

Product Code: WIRED-IR3

On-Link’s TCP/IP (Ethernet) to IR device provides a new level of automation and control flexibility, enabling device networking in Home or Commercial properties. By utilising On Controls software you can add On-Link’s Wired-IR3 which will allow you will be able to seamlessly connect, monitor, and control infrared devices over a network & internet. Auto Discovery on your network. On-Link hardware is auto discoverable on your network. This will eliminate the need to search, set up and configure via IP address or MAC address as needed with Global Cache.

Linked in to On Controls Software
On board web server for quick, easy setup and configuration
Allows up to 8 simultaneous connections to any smart device
Flash upgradeable to accommodate future upgrades in the field
Three independent user selectable IR outputs or sensor inputs - 3.5mm mono jack
Includes three IR emitters and one IR blaster (Port 3).
Third IR port supports IR blaster
IR Learner built in
Can draw power from USB Port

On-Link WiFi to IR

Product Code: WIFI-IR3

On-Link’s TCP/IP (Ethernet) to IR device provides a new level of automation and control flexibility, enabling device networking in Home or Commercial properties. By utilising On Controls software you can add On-Link’s Wired-IR3 which will allow you will be able to seamlessly connect, monitor, and control infrared devices over a network & internet. Auto Discovery on your network. On-Link hardware is auto discoverable on your network. This will eliminate the need to search, set up and configure via IP address or MAC address as needed with Global Cache.

Linked in to On Controls Software
On board web server for quick, easy setup and configuration
Allows up to 8 simultaneous connections to any smart device
Flash upgradeable to accommodate future upgrades in the field
Three independent user selectable IR outputs or sensor inputs - 3.5mm mono jack
Includes three IR emitters and one IR blaster (Port 3).
Third IR port supports IR blaster
IR Learner built in
Can draw power from USB Port

On-Link Wired TCP/IP to IR with POE

Product Code: POE-IR3

On-Link’s TCP/IP (Ethernet) to IR device provides a new level of automation and control flexibility, enabling device networking in Home or Commercial properties. By utilising On Controls software you can add On-Link’s Wired-IR3 which will allow you will be able to seamlessly connect, monitor, and control infrared devices over a network & internet. Auto Discovery on your network. On-Link hardware is auto discoverable on your network. This will eliminate the need to search, set up and configure via IP address or MAC address as needed with Global Cache.

Linked in to On Controls Software
PoE version allows you to place your iTach where power just can’t reach. PSU included as a backup
On board web server for quick, easy setup and configuration
Allows up to 8 simultaneous connections to any smart device
Flash upgradeable to accommodate future upgrades in the field
Three independent user selectable IR outputs or sensor inputs - 3.5mm mono jack
Includes three IR emitters and one IR blaster (Port 3).
Third IR port supports IR blaster
IR Learner built in
Can draw power from USB Port

On-Link Wired TCP/IP to Serial/RS232

Product Code: WIRED-SERIAL

On-Link’s TCP/IP (Ethernet) to Serial/RS232 device provides a new level of automation and control flexibility, enabling device networking in Home or Commercial properties. By utilising On Controls software you can add On-Link’s Wired-Serial which you will be able to seamlessly connect, monitor, and control Serial/RS232 devices over a network & internet. Auto Discovery on your network. On-Link hardware is auto discoverable on your network. This will eliminate the need to search, set up and configure via IP address or MAC address as needed with Global Cache.

On board web server for quick, easy setup and configuration
Allows up to 8 simultaneous connections to any smart device
Flash upgradeable to accommodate future upgrades in the field
One Serial/RS232 port offering bi-directional control
Linked in to On Controls Software
RS232 from 1200 baud to 57.6K baud
Male DB9
Can draw power from USB Port

On-Link WiFi to Serial/RS232

Product Code: WIFI-SERIAL

On-Link’s TCP/IP Wi-Fi to Serial/RS232 device provides a new level of automation and control flexibility, enabling device networking in Home or Commercial properties. By utilising On Controls software you can add On-Link’s Wired-Serial which you will be able to seamlessly connect, monitor, and control Serial/RS232 devices over a network & internet. Auto Discovery on your network. On-Link hardware is auto discoverable on your network. This will eliminate the need to search, set up and configure via IP address or MAC address as needed with Global Cache.

One Serial/RS232 port offering bi-directional control
On board web server for quick, easy setup and configuration
Allows up to 8 simultaneous connections to any smart device
Flash upgradeable to accommodate future upgrades in the field
Linked in to On Controls Software
RS232 from 1200 baud to 57.6K baud
Male DB9
Can draw power from USB Port

On-Link Wired TCP/IP to Serial/RS232 with POE

Product Code: POE-SERIAL

On-Link’s TCP/IP (Ethernet) to Serial/RS232 device provides a new level of automation and control flexibility, enabling device networking in Home or Commercial properties. By utilising On Controls software you can add On-Link’s Wired-Serial which you will be able to seamlessly connect, monitor, and control Serial/RS232 devices over a network & internet. Auto Discovery on your network. On-Link hardware is auto discoverable on your network. This will eliminate the need to search, set up and configure via IP address or MAC address as needed with Global Cache.

One Serial/RS232 port offering bi-directional control
On board web server for quick, easy setup and configuration
Allows up to 8 simultaneous connections to any smart device
Flash upgradeable to accommodate future upgrades in the field
Linked in to On Controls Software
RS232 from 1200 baud to 57.6K baud
Male DB9
Can draw power from USB Port
PoE

On-Link IP To Relay/Contact Closure

Product Code: WIRED-CONTACT

On-Link’s TCP/IP (Ethernet) to Contact Closure Relay allows you to quickly connect almost any electrical device to a network for remote control. In line with the IR and Serial/RS232 products, the On Control software and hardware provides a new level of automation and control flexibility, enabling device networking in Home or Commercial properties. Auto Discovery on your network. On-Link hardware is auto discoverable on your network. This will eliminate the need to search, set up and configure via IP address or MAC address as needed with Global Cache.

3 Integrated contact closure relays with transient voltage suppression
On board web server for quick, easy setup and configuration
Allows up to 8 simultaneous connections to any smart device
Flash upgradeable to accommodate future upgrades in the field
Linked to On Controls Software
5 to 16V DC @ 300mA
Can draw power from USB Port

On-Link WiFi to Relay/Contact Closure

Product Code: WIFI-CONTACT

On-Link’s Wi-Fi to Contact Closure Relay allows you to quickly connect almost any electrical device to a network for remote control. In line with the IR and Serial/RS232 products, the On Control software and hardware provides a new level of automation and control flexibility, enabling device networking in Home or Commercial properties. Auto Discovery on your network. On-Link hardware is auto discoverable on your network. This will eliminate the need to search, set up and configure via IP address or MAC address as needed with Global Cache.

3 Integrated contact closure relays with transient voltage suppression
On board web server for quick, easy setup and configuration
Allows up to 8 simultaneous connections to any smart device
Flash upgradeable to accommodate future upgrades in the field
Linked to On Controls Software
5 to 16V DC @ 300mA
Can draw power from USB Port

On-Link IP to Relay/Contact Closure with PoE

Product Code: POE-WIRED-CONTACT

On-Link’s TCP/IP (Ethernet) to Contact Closure Relay allows you to quickly connect almost any electrical device to a network for remote control. In line with the IR and Serial/RS232 products, the On Control software and hardware provides a new level of automation and control flexibility, enabling device networking in Home or Commercial properties. Auto Discovery on your network. On-Link hardware is auto discoverable on your network. This will eliminate the need to search, set up and configure via IP address or MAC address as needed with Global Cache.

3 Integrated contact closure relays with transient voltage suppression
On board web server for quick, easy setup and configuration
Allows up to 8 simultaneous connections to any smart device
Flash upgradeable to accommodate future upgrades in the field
Linked to On Controls Software
5 to 16V DC @ 300mA
Can draw power from USB Port
PoE